open 24/7 Locksmith Service
  1. Home 
  2. »
  3.  Blog 
  4. »
  5.  Smart Water Sensor Alarms & Flood Protection

Smart Water Sensor Alarms & Flood Protection

 

Installing a smart water sensor in your home could make the difference between a flooded bathroom or laundry room and a dry and safe home. Ranging from clogged toilets, burst water pipes, and broken water heater issues, there are numerous reasons why a home flood could occur. If you wish to be one step ahead of the potential hazard, make sure you take all the right precautions. Start by installing a flood sensor in every area of the house that is more prone to cause a flood. Opt for the best water leak detector app so you can take your anti-flood policy on the go, straight on your smartphone.

How Do Flood Alarms And Flood Sensors Work?

  • water leak sensorsA flood sensor is a tiny device that can effectively detect various levels of moisture in a room for the purpose of closely monitoring a potential flood. Some sensors can also monitor the temperature inside a room so the risk of freezing can be kept to a minimum during the cold season. Flood sensors can also let you know whenever you are dealing with a leaking pipe issue or a faulty appliance that runs on water and that could wreak havoc inside the house.
  • When a small leak occurs, it can rapidly cause a flood inside the house and this can only take a few minutes at times, depending on how big the leak is.  A good water sensor will immediately detect any the send a notification or a warning to your phone once the water levels will start to rise. A smart flood sensor that can be integrated with a smart home automation system will begin to send push notifications to smartphones and tablets as well. This will give you sufficient time to carefully investigate the problem and take the necessary action with zero delays.
  • The flood sensors can be easily installed in any room of the house that has pipes running through it, as well as in those areas that are improperly insulated or heated. Focus on installing the sensors in the laundry room, bathroom, under the kitchen sink, and other similar areas.

Water leak sensors located near water faucets and fixtures work by assessing the entire water system, including the main water supply, and look for any signs of dripping. Once an issue is identified, the sensor will send out a signal and shut down the valve to the water supply. This is particularly useful when there is no one home to handle the issue on the spot. Also, these water sensors should also be a common presence inside a vacation home that you only visit a couple of times a year and where prevention measures should be even more consistent and effective. They can measure the level of water in a room, as well as supervize sump pits, identify rainfall and detect and alert you about any sign of leakage.

How To Install Water Flood Sensors?

Most water leak detectors can sound a 110-decibel alarm on average while detecting a small quantity of water of 1/32 of an inch. The simples alarms have no need to use batteries. The water sensors can be easily installed beneath or behind an appliance that relies on water to work, such as refrigerators or washing machines. Normally, velcro strips are used to set the sensors.

It is also possible to use a more complex water leak detector that can shut off the water system immediately, once a leak is found. Such a sensor will easily hook up to the water valves and will help you avoid any water damage before you even know there was a leak, to begin with.   Smart water leak sensors will automatically send out a notification to your phone whenever a leak is detected, but if you cannot afford a smart water sensor that works well with a home automation system, you can always shop for a cheaper detector that falls in your budget.

Additional Advantages Of Water Flood Alarms

For more peace of mind there are also water sensors that can send out alerts to a plumber, the landlord, a neighbor, or anyone else who can reach your property faster than you. Keep in mind that the speed at which you will act during a water pipe leak will make the difference between having to simply lay down a towel or be forced to invest in new flooring.  Some water floor alarms feature cables that must be laid down throughout the rooms of the house where the risk of a flood is higher, including basements and the laundry room. The alarm's console will need to be fit on the wall and once water will touch the cable, the alarm will begin to sound, alerting a special monitoring center. From there on, you, a plumber, your spouse a friend, or a neighbor can also receive notifications in real-time.  The water sensor siren can be adjusted to sound for a few seconds or a few minutes and some models feature a latching siren that can be easily turned off at any given moment with the help of remote control. There are also remote controls that feature SOS buttons that can prove to be helpful in a number of security or health emergencies. For example, some flood alarms can be used as burglar alarms and door chimes, or as temperature-monitoring devices.

Keep in mind 93% of water damage at home can be prevented with the help of water detectors and water sensors, so it is an investment worth looking into for more peace of mind.